I am a slot machine technician looking for work

I am familiar with:
X General machine repair
X Monitor repair
X  Power supply repair
X  Hopper repair
X  Bill Validator repair
X  Coin Comparitor repair
X  Coin handling equipment repair
X   Board level CPU repair
X   Machine installation and networking
     Other:

Name  Christopher Roth
address  1797 Esteban Ave
city  Laughlin NV, 89029

702-810-1151

fax 702-298-3854
racnrose@mail.com
willing to relocate?
  X yes     no

Comments:

I have been a Slot Technician/Mechanic for the last 14 years. I also graduated from AAS Electronics course. Please see resume for
complete details. I would be willing to relocate for the right position
Hello, I would like to introduce myself. My name is Christopher Roth

I have been working in the electronic field for the past 14 years. Previous to that I have had various other position’s from book keeping to management. I also had training in the USAR for teletypewriter. Previous to that I had completed an 18 week basic electronics course.

I am looking for long term employment with a stable employee orientated company with growth and advancement potential. I am an extremely dedicated person. I feel that I would be a great asset to any company I work for.
 

Thank You.
Christopher R Roth
 
 
 

1797 Esteban Ave
Laughlin, NV 89029 Phone: 702-810-1151
Fax    : 702-298-3854
Email : racnrose@mail.com
Christopher R Roth

Objective I am looking for long term employment with great benefits and opportunity for advancement.
Experience 1996-2004 IGT Laughlin, NV
Service Technician II
Job Duties have varied over the last 8 years. When first hired in 1996 and for the next four years my primary responsibilities were ordering parts for all Laughlin resorts which included research and machine configuration for conversions. I was also responsible for warehouse inventories for the Laughlin office including stocking levels and reordering. When available I also was required to go into the field and complete machine repair’s, jackpot verification, minor sign repair, assist with installs, troubleshoot phone lines, and all other aspects of keeping IGT machines in good service. The parts position was eliminated and taken over by the IGT Las Vegas office. The warehouse stayed at the Laughlin location. Eventually the Supervisor was moved to Las Vegas and the office administrator position was eliminated which left all office responsibilities to myself and the lead tech. This included interfacing with vendors and computer data entry and tracking. My primary duties for 1 year were field service of gaming machines and all IGT peripheral equipment. After this 1 year time period my main duties migrated to CN and IN machine updates. My responsibilities included machine research, parts order’s, scheduling, and also the actual completion of the update’s with all associated tracking paperwork and computer tracking. Through this I now have a working knowledge of all MS office applications. The usage of laptops was also necessary for programming various devices in the field. I also completed the majority of special projects that arise including assisting other departments to install various other equipment such as EZ-pay, EZ-route with EZ-safe, and IGT player tracking. I have a working knowledge of past and present IGT games and all supporting equipment. While at IGT I have completed IGT’s associate Technician courses. I have also completed an effective communication course and a Technical communication course.
 1995-1996 Flamingo Hilton Laughlin Laughlin, NV
Slot Repair Technician
Responsible for all repairs to maintain the gaming floor in good working order to included repair down to component level on gaming machines from various manufacturers. Maintain other products such as player tracking, coin sorters, coin changers, and electronic table game devices. Also was involved in all special projects from player tracking installs, machine moves, machine conversions, and the install of over 400 aftermarket bill validator’s.
 1991-1995 Sam’s Town Gold River/Gold River Laughlin, NV
Slot Repair Mechanic
Responsible for all repairs to maintain the gaming floor in good working order to include repair down to component level on gaming machines from various manufacturers. Worked closely with the board technician on component level repairs on all gaming devices. I was assigned the responsibility of the first CDS player Tracking install. This included all aspects of install including, research for proper wiring to machines, tracking of materials and requesting more parts when needed, troubleshooting hardware and software problems that occurred during project, interfacing with other department’s including computer training, and giving management final approval that system was working correctly. Other special projects included anything from machine moves to machine conversions.
 
Education 1988-1990 Heald Institute of Technology San Jose, CA
AAS, Electronic and Computer technology.
Graduated with a 3.95 GPA.

1983-1984                        USAR                                          Fort Gordon, GA
Teletypewriter Repair
Graduated without failing any tests on several styles of teletypewriter’s
Interests Computer’s, I have built and currently maintain several systems including a small network. Skiing, Hiking, electronics of all kinds, ok and sometimes I play video games.
Community I am currently assisting the Local constable to start the first C.E.R.T. (Community Emergency Response Team) for Laughlin. My Duties will include just about everything. I am a certified trainer for this program. I received my certification from the EMI institute in Maryland. I have also been involved in the following activities. Cub master and Scout master for 5 years, Coached Little league baseball for 3 years.

Attached please find my resume.  I am familiar with General machine repair,
monitor repair, power supply repair, hopper repair, bill validator repair,
coin comparitor repair, coin handling equipment repair, board level cpu
repair, machine installation and networking.  I have supervised slot
technicians for a manufacturer.  I am willing to relocate to Southern
California or Lake Tahoe area only.
Thank you for reviewing my resume

STEVEN FINKLER
3104 Aristotle Ave North Las Vegas, NV 89031  Home:702-647-1158
Cell:702-371-1062 Email:prizmdriver@hotmail.com

OBJECTIVE:
To pursue a challenging position with your company where my experience and
capabilities will benefit a progressive organization. To work with people
that are team oriented and a can do attitude.

PROFESSIONAL EXPERIENCE:

SQA Test Tech: 6/02 TO PRESENT  Sigma Game Inc. Las Vegas, NV
Final testing and inspection of slot, video slot and video poker gaming
machines. This included testing of the software.

LEAD SLOT TECH: 3/97-9/00  Casino Data Systems  Las Vegas, NV
Troubleshoot and Repair of Slot machines. Responsible for shift. Field
Service. My job required knowledge of computers and various software
programs in addition to customer and employee relations. I supervised the
shift slot technicians.

TIMEKEEPER: 9/96 to 3/97 Sante Fe Hotel ? Casino Las Vegas, NV
Computer entry of employee’s time punches. Entry into computer of Toke
Sheet.

INSPECTOR: 3/90 to 8/96 Mouser Electronics Randolph, NJ
Inspection of electronic parts, verified with computer.

SONAR TECH: 6/83 to 6/89 US Navy Groton, CT Submarine Duty.

EDUCATION:
Las Vegas College  Las Vegas, NV  Bookkeeping/Accounting - 5/03 to
4/04. Word, Excel, Peachtree, Keyboarding.

CDF Gaming Machine Repair School, Las Vegas, NV – 2/97 to 5/97

US Navy – 1983 to 1989 – Basic Electricity and Electronics school,
Submarine school, Sonar Tech “A” and “C” schools, SQS-49 school.

County College of Morris – AA in Business Administration – 1980 to 1982

Skills and Abilities:
Basic electronics, Computer Literate including knowledge of Win95, 98, ME,
XP. Microsoft Word, Excel, Outlook, Peachtree. I am a Team Player,
Teachable, Detail oriented, Diligent. 2004 Academic Excellence Award from
Las Vegas College. I have a good understanding of software and am able to
learn quickly. My years in the Navy on a submarine taught me discipline and
the importance of teamwork.

Licenses:
Sheriff’s Gaming Card; Student Pilot’s License.
References: Available upon request

Seeking employment as a SLOT TECH

Background in Manufacturing Engineering
Machine design, de-bug and troubleshooting
Production Line planning and troubleshooting

Education
Green Valley School of Gaming    Las Vegas, Nevada
2004:  255-hour course in Gaming Machine Repair - SLOT TECH 1
Basic Electronics
Use of Oscilloscope and Digital Multimeter
Coin Comparitors
Hoppers
Calibration of JCM Bill Validators
Programming Mikohn Progressive System
Troubleshooting electronic gaming equipment
Diagnostic procedures used in gaming machines
 

Michigan State University       B.S. Degree, Physics ? Mechanical Engineering.
 
 

Employment

1980-2003  MACHINE DESIGN CONSULTANT                  Self employed consultant
         Mission Viejo, CA
Conceptual proposal and design service for special machines and equipment, machining centers and automation systems for manufacturing.  Equipment and production line planning, de-bug and troubleshooting.
 
 

1978-80  CHIEF DESIGN ENGINEER   D B Inc.
Santa Ana, CA
Proposal, quotation and design of special machines and automated systems for assembly and machining.
Equipment and production line planning, de-bug and troubleshooting.
 

1976-78  MANUFACTURING ENGINEER   Elpower Corporation
         Santa Ana, CA
Production line planning and troubleshooting.  Proposal, justification, design and purchase of new equipment.
 

1973-76  MANUFACTURING ENGINEER   Master Specialties Company
          Costa Mesa, CA
Production line planning and troubleshooting.  Proposal, justification, design and purchase of new equipment.

DENNIS M. JARON
6223 E. SAHARA #187
LAS VEGAS NV. 89142
PHONE#431-1796 HOME 807-6363 CELL
BLACKIESANGELS7@AOL.COM
 

Objective
 To pursue a challenging career as a Slot Mechanic or a Lead Mechanic where my experience and capabilities will benefit a progressive organization.
 

Qualifications
Identify, assemble and disassemble various gaming machines
Basic electronics including multi-meters, schematics, and soldering
Basic rules and regulations of Nevada Gaming including regulation6A
Electronic Gaming machine theory to include manufacturers of IGT, Bally, Sigma, WMS, Konami,  Atronics, VLC, and Mikohn progressive systems.
Game conversions, calibration of coin comparators and bill validators and game troubleshooting techniques.
Education
Feb.1997 to May 1997 CDF Gaming Machine Repair Las Vegas Nev. Diploma
1984 to 1985  Southwest College Computer Electronics Technician San Diego Ca. Diploma
1977 to 1978  Coleman College Computer Programming San Diego Ca. Diploma
1975 to 1976 Bryant College Marketing and management Smithfield R.I. Diploma
U.S. Navy Pay Grade E-4 1967 to 1971
 

Relevant Experience
12/03  to 2/04 Slots A Fun Las Vegas Nev. Slot Mechanic
6/03  to 12/03 Club Fortune Henderson Nev. Slot Technician
1/01  to 1/03  Castaways Hotel and Casino Las Vegas Nev. Slot Mechanic
8/00  to 1/01  Primm Valley Resorts Primm Nev. Slot Technician
3/00  to 8/00  Santa Fe Hotel and Casino Las Vegas Nev. Slot Technician
11/98  to 3/00  Anchor Gaming Las Vegas Nev. Lead line Technician
8/97 to 11/98  IGT Las Vegas Nev. Service Technician
 9/96 to 8/97  Primm Valley Resorts Primm Nev. Slot Floor person
5/96 to 9/96 Harrah?EUR™s  Lake Tahoe Nev. Slot Floor person
2/85 to 5/96 Self Employed as a Technical Consultant
 
 

 References Available Upon Request 

  David Kasinski
  260 Ehinger Drive
  Buffalo, N.Y. 14224
  716-675-2131
  dktmkas@msn.com

  willing to relocate? - no
 

  -General Machine Repair
  -Monitor Repair
  -Power Supply Repair
  -Board Level CPU Repair
  -Machine Installation and Networking
  -OTHER:
      A.A.S. Computer Repair Technology
      Certified  Training in Programmable Logic Controllers
 

I am seeking a position as Slot Technician to utilize my skills and to further my knowledge as to advance my career.
EDUCATION

1988-2001 Keokuk Senior High School Keokuk, Ia
High School Diploma

2000-2001 Southeastern Community College Burlington, Ia
American Builders ? Contractors (Electrical)

2002 JCM Incorporated Kansas City, MO
Certified Technical Training
WORK EXPERIENCE

2002- Ameristar Casino Kansas City, MO
Slot Technician / BV Technician
* Responsible for keeping bill validators up and running
* Able to rebuild power supplies
* Work on, repair and keep machinery operating at full capacity
* Work with CDS Communications and some MIKHON Gaming Signs
* Capable of helping out and taking care of 3500 machines.
* Machines I have worked on are as follows: WILLIAMS, P+, PE UPRIGHT/SLANT TOP, KENO UPRIGHT, BALLY AND GAME KING BAR TOP POKER
* Worked with ticketing machines learning how to repair, install and troubleshooting
* Currently holding a Level 2 Missouri Gaming License and have been employed with Ameristar for one year coming up on September 25, 2003
 
 

2002 Riley's Construction Des Moines, IA
Maintenance / Machinery
* Heavy equipment operator
* Maintenance Technician
* Repair machinery when it breaks down
 

2001-2002 Catfish Bend Casino Ft. Madison, IA
Slot Technician
* Responsible for keeping machines operating at full capacity
* Install and uninstall slot machines
* Disassemble and reassemble slot machines
* Clear hopper jams
* Hand pays of Jackpots
* Filled hoppers
* I worked on the following machines: WILLIAMS, MIKHON, ARISTOCRAT, PE+, PE UPRIGHT/SLANT TOP, KANOMI, KENO UPRIGHT
* Experience in communications data running
* 9 months on floor experience
* Had a Class C Employee Gaming License which expired 8/02

SKILLS
 

* Welding
* Auto Mechanics
* Electrical Repairs
* Computer Skills
* Easy Going
* Dependable
* Great Determination
* Slot Machine Repair
* Electrical Apprentice Training
* Installing Car Stereos

9813 WILLOW AVE., APT 1C • KANSAS CITY, MO 64134
PHONE (816)679-8229 • E-MAIL KRUPP_51@MSN.COM
 
 
 

                             I am a slot machine technician looking for work

I am familiar with:
General machine repair, Monitor repair  Power supply repair, Hopper repair
Bill Validator repair,  Coin Comparitor repair, Coin handling equipment repair
Board level CPU repair, Machine installation and networking
 

Name:  Lettica Stewart
address: 4213 Grove Circle #4
city: Las Vegas
state, zip:  NV, 89119
telephone number: (702) 785-0306
E-mail address: StewartLettica@MSN.com
willing to relocate? Yes.

               I am a slot machine technician looking for work

     I am familiar with:
        General machine repair yes
        Monitor repair yes
        Power supply repair yes
        Hopper repair yes
        Bill Validator repair yes
        Coin Comparitor repair yes
        Coin handling equipment repair yes
        Board level CPU repair yes
        Machine installation and networking yes
        Other:  can read and understand schematics;through understanding of all forms of electronic
     technology. Was a digital electronics repair technician for 15 years.
 

     Name  Jeffrey M. Chaifetz
     address  44 Hancock Street
     city  Swedesboro
     state, zip  New Jersey 08085
     telephone number  856-467-1308
     E-mail address    jiffyjeff@verizon.net
     willing to relocate? yes

     Comments: I am also familiar with Microsoft Word/Excel and can type.

                             I am a slot machine technician looking for work

  I am familiar with:
  General machine repair
  Hopper repair
  Bill Validator repair
  Coin Comparitor repair
  Coin handling equipment repair
  Board level CPU repair
  Machine installation and networking
 

  Name  Alicia M Rivera
  address  1516 6th Ave
  city  Pleasantville
  state, zip  New Jersey 08232
  telephone number  609 992-7779
  E-mail address arivera459@msn.com
 

  willing to relocate?

     yes     Comments: Attending ACC CCI for Slot Tech completion date is Sept 11, 2003

OBJECTIVE
Seeking a position in Manufacturing Process Engineering that offers challenge and growth potential with an organization where problems and opportunities are well matched with my abilities and skills.

HIGHLIGHTS OF QUALIFICATIONS
? Detail and profit-oriented, with proven ability to identify, repair, analyze and solve problems.
? Performs effectively despite sudden deadlines and changing priorities.
? Highly reliable self-starter; can be counted on to complete assignments with little or no supervision.
? Ability to supervise, motivate, train and increase productivity.
? Possess excellent communication and interpersonal skills.
? Strongly cost conscience, with ability to detect design flaws and recommend changes to facilitate
production, prevent errors, save time and eliminate scrap.

EMPLOYMENT HISTORY
Viking Components – Rancho Santa Margarita, CA  May 2000 - Present
Modem and flash memory products for computers and digital devices.

Sr. Manufacturing Engineer
Responsibilities:  Oversee and manage SMT manufacturing processes and equipment; provide document support for high volume, automated, semi-automated assembly production lines; assist in the training, development and implementation of One-Piece-Flow and 5S process in a lean manufacturing environment; perform conveyorized reflow oven thermal profiling for all existing and new product designs; new product introduction (NPI); facilities planning; back-up engineering managerial responsibilities.

Achievement Highlights
? Researched and developed a uBGA re-balling process to salvage expensive, functional components.
    Results:  Cost savings realization estimated at $35,000 annually
? Performed root cause analysis on Viking Components Rambus Micro BGA assembly line process
operation resulting in process optimization and operation reorganization.
Results:  Cycle time reduction and yield improvement from 40% to 90%
? Developed and updated multiple manufacturing work instructions.
 Results:  Improves overall deliverable product quality
? Authored, designed and implemented a Manufacturing Plan for all new product introductions.
 Results: Eliminated manufacturability problems commonly associated with new products.
? Researched, planned and executed the successful completion of a new Micro BGA high volume
product design into production assembly.
Results: One hundred percent yield resulting in a significant increase in business.
? Recruited to design and layout entire company facility for potential relocation to new building
utilizing Auto-Cad 2000.
Results: Upper management impressed and pleased with new floor plan.

Training and Development

6/2000  Manufacturing Technology Training Center – Ridgecrest, CA
 IPC-610C, Acceptability of Electronic Assemblies, Class A Instructor

8/2000  Microtek Laboratories – Anaheim, CA
 IPC-A-600, Acceptability of Printed Board, Certified Instructor/Inspector

10/2000 Juki (Zevatech) Automation Systems – San Jose, CA
 Models 730, 740, 750, 760 Pick and Place Operations Course

2/2000  Time Management Class – Rancho Santa Margarita, CA

 Michael Vititoe
- Page Two -
 
 

Endevco Corporation – San Juan Capistrano, CA  January 1990 – March 1999
Dynamic instrumentation and sensor manufacturing facility.

Sr. Manufacturing Engineer
Responsibilities:  Provided manufacturing process and documentation support for approximately 75% of all assembly processes; instructed, trained and certified assembly personnel to Mil-Spec 2000 ? IPC 610B soldering; supported responsibilities for GTAW, laser, resistance, percussion welding, brazing and laser engraving; led a team of selected individuals to implement and optimize the transition of brand new laser engraving technology; authored, revised and optimized numerous manufacturing assembly processes instructions; implemented a new data-logging, strip chart recording system, company-wide to monitor the numerous assembly process ovens, 24 hours a day, 7 days a week;
repaired manufacturing assembly equipment; assisted the design engineering department during the product development to full manufacturing phase; offsite assembly process equipment evaluations to determine suitability for procurement and production use; researched, designed and developed manufacturing assembly tooling and fixtures; established process document control consistent with the requirements of ISO 9001 and provided assistance during company audits; annually visited  St. Croix, Virgin Island facility to evaluate and review manufacturing assembly procedures and equipment to insure compliance with ISO 9001; performed process capability evaluations, as well as vendor process survey audits; designed and maintained statistical process charts (SPC); assessed, analyzed and dispositioned corrective actions for many product and process failures; performed root cause, failure analysis and supported results with technical reports/documentation for distribution to management; four years spent as both a manufacturing engineer and a production supervisor; evaluated and implemented alternative cleaning solvents and equipment to comply with AQMD/EPA requirements.

Achievement Highlights
? Designed/developed a vacuum bonding process for attaching ceramic hybrid substrates onto stainless steel
header bases... procedure received government approval.
Results:  Cost savings surpassed $30,000 annually
? Recruited by the President of Endevco to solve numerous anodize defects experienced on many product lines...determined cause related to design flaws, vendor processes, as well as internal assembly processes.
 Results:  Cost Savings estimated at $75,000 annually
? Researched/designed/developed a low cost, high volume reflow soldering process for attaching crystals to
a Kovar Sensor Support and a Densalloy Mass using an automated, conveyorized, convection/conduction
heating system.
 Results:  First year cost savings realization of over $100,000 annually

Training and Development
 1997 - Distributed Motion, Inc. – Irvine, CA
Parker Computers 6000 Motion Architect Stepper Workshop

 1997 -  SPC Certification, Basics Training - San Juan Capistrano, CA

 1997 - Design for Assembly and Manufacturing, DFMA - San Juan Capistrano, CA

 1996 -  Meggitt/Endevco Corporation - San Juan Capistrano, CA
     Course Curriculum on the Subject of Shock ? Vibration Measurement Technology

 1996 -  IPC610B - Acceptability of Electronic Assemblies, Class A Instructor

 1994 -  Loral Aeronutronic - SPC Training and Development

 1993 -  California State University - Fullerton, CA - Office of Extended Education
  Electronics for Non-Electrical Engineers

 1993 -  California State University - Fullerton, CA - Office of Extended Education
  Microcircuit Interconnection and Assembly Methods

 1990 -  Department of Defense, Naval Air Weapons Division - China Lake, CA
Soldering Technology Certification in accordance with MIL-STD-2000, Authorized as a
Category “C” Instructor/Examiner
 
 

 Michael Vititoe
- Page Three -
 

Hughes Aircraft Corporation - Fullerton, CA  February 1979 – January 1990
Aerospace – Ground Systems Group

Process Engineer
Materials, Processes and Technology Department - Surveillance ? Sensors System Division
Responsibilities: Electronic assembly line product and process support; resistance welding; mil-spec soldering; cycle time reduction responsibilities; conformal coating process support; plastics, adhesives and inks; cleaning/ contamination improvements and controls; process research and development.
Material and Process Analyst
Manufacturing Technology Department, Manufacturing Division
Responsibilities:  Performed metallography; microsections; photo documentation; coatings/sealants research; infrared spectroscopy; physical/chemical analysis.
Plastic Fabricator
Fabrication Services Department, Manufacturing Division
Responsibilities:  Potting; composite lamination; plexiglass forming; tool molding fabrication; bonding; encapsulation

Achievement Highlights

? Developed/invented a new material with unique properties to solve a process implemented at all company sites.
 Results:  Labor savings totaled over $500,000 per year
? Evaluated and optimized a conveyorized conformal coating system...analyzed and developed a superior method for mixing and spraying acrylic and polyurethane coatings...enhanced cleanliness/ handling/ masking procedures.
 Results:  Reduced defects by over 50%.  Cost savings realization of over $275,000 annually.
? Recruited to solve production shutdown involving solvent-sensitive, adjustable components...conducted in-depth analysis...directed procurement and implementation of solvent-resistant, water-soluble maskant to seal components.
 Results:  Savings exceeded $50,000 per year
? Conducted component failure analysis of DIP Capacitors to resolve low yield in electronic assembly processes... determined cause related to vendor fabrication processes
 Results:  Assembly/rework labor savings totaled $300,000.

EDUCATION
BSME in progress, Riverside Community College, Riverside, CA, 50 Transferable Units
(Work Experience not included towards degree)

SOFTWARE APPLICATIONS
- Introduction to AutoCAD 14/AutoCAD 2000 – Certificate of Completion
- Visio 2000
- Agile CM
- MS PowerPoint 97
- MS Word 2000
- MS Excel 97:  Modules 1, 2, 3 ? 4
- MS Outlook
- MFGPRO

CLEARANCES:   Secret and COMSEC

PERSONAL:   Excellent health
     Proven perfect attendance record - Available any shift
     Enjoy fishing, marshal arts and home improvement projects

I have experience in all of the categories mentioned above as well as supervisory experience and Auto Cad.

Clifton L. Dykes
Bubbadykes@aol.com
8216 Defiance Avenue
Las Vegas, NV 89129
(702) 656-7785 (ph)
(702) 354-0672(cell)
(702) 395-9996 (fax)

PROFESSIONAL OBJECTIVE
 Seeking to obtain a challenging position that will enable me to utilize my   education and years of experience as a Slot Technician.

EXPERIENCE:

Feb 2002 – Present  Plaza Hotel and Casino
    Las Vegas, NV 89101

    Lead Slot Mechanic – Technician

    Responsible for: On-site installation of Company products.
    Knowledge of hardware/software components.
    Ability to provide troubleshooting techniques.
    Maintaining detailed service records.
    Repair and maintenance of equipment.
    Communicating with customers and collegeaues.
    Testing gaming devices.
    Auto-Cadd
    Supervising, Training , Evaluating, Hiring, Terminating staff.
    Assisting with special projects.
    Implementing/Developing Policies and Procedures
    Reporting to Senior Management and Accounting
 

Feb 1986 – Sep 2001  Mandalay Corporation, Hotel and Casino
    Luxor Hotel and Casino
    Las Vegas, NV 89101

    Slot Mechanic – Technician
    December 1989 – September 2001

    Responsible for: On-site installation of Company products.
    Knowledge of hardware/software components.
    Ability to provide troubleshooting techniques.
    Maintaining detailed service records.
    Repair and maintenance of equipment.
    Communicating with customers and collegeaues.
    Testing gaming devices.
    Auto-Cad
    Assisting with special projects.

Hardcount – Circus Circus Hotel and Casino
November 1987 – November 1989

Stove Cleaner – Circus Circus Hotel and Casino
February 1986 – October 1987

Sep 1999 – Apr 2001  Clark County School District
    Las Vegas, NV
    Transportation Aide

    Responsible for:
    Assisting students on and off the bus.
    Putting students in their seatbelts.
    Maintaining order on the bus.
    Defusing angry students.
    Reporting incidents to Clark County School District.

    Education:

    Nevada Gaming School
    Las Vegas, NV
    Slot Technician/Electronics
    January 1987 – December 1987

    Reuben McCall Senior High School
    High School Diploma
    Tallulah, Louisiana 71282
 

  I am a slot machine technician looking for work

I am familiar with:

General machine repair
Monitor repair
Power supply repair
Hopper repair
Bill Validator repair
Coin Comparitor repair
Coin handling equipment repair
Board level CPU repair
Machine installation and networking

Repair electronic rullet type Alfa street. .Aristocrat, IGT, Atronic

Zdravcho Dekov Dimitrov
Lulin 3 bl.362 et.13 ap.75
Sofia, Bulgaria
telephone number +35988967575
E-mail address poker_1965@yahoo.com

I work ten years in Bulgaria repair slot machine

Servet Saatci
Welfare Road #34, COLE BAY, St-Martin
E-mail: servetsaatci@hotmail.com
Phone: 599.5591804
Career Objective:
Having spent 12 years in the casino industry from slot mechanic to slot manager, I am seeking a position, in Slot Technician or Slot Manager, with a people oriented company that rewards for dedication, loyalty, and hard work.

Summary of Qualification

Twelve years experience in Casino industry.
Excellent knowledge of Slot Machines, Video Games and Tools used in Casino
Proven ability to find and fix any Slot Machine problem.
Skilled in solving problems may occur at Casino related to electronic devices.
Provided expertise to Istanbul Chamber of Commerce as an Independent

Slot Machine Expert.
Great knowledge and experience of repairing IGT Slot and Video main boards, previous version of Aristocrat machine's boards and power supply boards. Ability to find non-functional resistant or capacitor or transistor or EPROM or integration chips (74 series and TTL series) and changing them. Fixing broken Hopper’s by following the route goes to microprocessor and identifying parts on this route one by one and replacing non-functional unit. Performed EPROM copying process.

Experience:

14.01.1999- Present         OASIS Gaming Tropicana Casino                    St-Marten
Slot Manager
Tropicana has a wide array of slot machines ranging from 1 cents to 1 dollars and poker machines. These machines are: IGT ( Vision Series, I Game, Up-Right Slot and Poker, Slant-top Slot and Poker, Game King), Bally, VLC, Aristocrat, Atronic, Odessy Multi Game, Sega Horse Race, Glory Money Handling and Wrap Machines, Automatic coin counting Machine, Coin Scale Machines etc.
 
 

Opened Tropicana Casino from scratch. Duties included designing floor, cabling, testing machines etc.
Solely responsible for maintenance of 200 slot machines and video games

?     Responsibilities consisting of trouble shooting and repairing hundreds of slot machines, preventive maintenance as well as floor assignments.

?     Upgrading Bill Acceptors attached to Slot Machines. Performed upgrade by changing Eprom or Uploading new program from Lap Top Computer on JCM, WBA and DBV Bill Acceptor.

Maintaining Glory Money Handling and Wrap Machines, Coin Counting Machine, Coin Scale Machines. Upgrading   Money Handling machine in order to accept new USA bills.

Performed connection and set up of MIKHON PROGRESSIVE SYSTEMS.
 

05.05.1991-01.12.1998           NET TOURISM INC.                           Turkey

Service Engineer

            As a journeyman slot tech and part of the special projects team, I opened new Casinos, installed new equipment, moved equipment, installed the Aristocrat and Bally , filled in while slot administrative personnel were out on vacation, serviced slot tournaments, and filled In as floor mechanic as needed.

 Opened new Casinos. These are:

’1    ?inar Casino, Istanbul

?2     Swiss Casino, Istanbul

©3     Dedeman Casino. Istanbul

?4     Ananas Casino, Alanya

?5     Kiris World Casino, Kemer

?6     Hierapolis Casino, Denizli

©7     Ramada Hotel Casino, Mersin

?8     Dedeman Casino, Nevsehir

?9     Merit Altinol Casino, Ankara

?10   ?elik Palas Casino, Bursa
 
 

01.01.1989 – 01.04.1991        Metropol Hotel                         OHRI, Yugoslavia

Slot Technician

Responsible for trouble-shooting and repairing slot machines. Maintained floor duties, preventive maintenance and the daily operation of the casino industry as it related to the installation of slot machines. I have warehouse experience in receiving, storage and the preparation of slot machines in route to the gaming hall.

?    Re-arrange Slot Machines base customer demand.

?    Maintain upkeep, preventive maintenance and casino floor operations of slot machines and customer relations.

?    Responsible for creating a weekly schedule for 10 or more Attendants. Created a professional environment     where outstanding customer service is a priority.

©     Maintained excellent customer satisfaction standard, training staffs to meet same standard.
 
 

Education: Karadeniz Technical University, Trabzon, Turkey
      B. Sc. Electronic Engineering

References:Available Upon Request

Certificate of Training JCM,GPT

I am a slot machine technician looking for workI am familiar with:
  xGeneral machine repair
  xMonitor repair
xPower supply repair
xHopper repair
xBill Validator repair
xCoin Comparitor repair
xCoin handling equipment repair
xBoard level CPU repair
xMachine installation and networking
Other:
Name  Mike Hogan
address  3110 W. 66th Ave.
city  Denver
state, zip  CO., 80221
telephone number  303-426-6370
fax number  303-426-6370
E-mail address mhohan@platinumoffice.com
willing to relocate?     yes     xno

           I am a slot machine technician looking for work

I am familiar with:
x  General machine repair
   Monitor repair
x  Power supply repair
   Hopper repair
   Bill Validator repair
   Coin Comparitor repair
   Coin handling equipment repair
x  Board level CPU repair
   Machine installation and networking
x  Other:  Board level and chip level troubleshooting and repair for desktop and mainframe computer systems.
Electrical installation and repair. Digital and Analog systems repair and troubleshooting. Computer power
supply troubleshooting and reapir on both analog and digital power supplies. Machine maintenance and repair.
Refrigeration systems repair. Fabrication, repair and replacement of machine housings as well as cosmetic
replacement and repair of consumer input interfaces.
 

Donald DeLauder
112 E. California Ave.
Vista, California  92084-5008
telephone number 760-414-9550
E-mail address  delauder@netzero.net

willing to relocate?

   yes     xno

Comments:

Looking for  a slot tech or slot repair position in the north San Diego county area, as well as the Temecula area

I am a slot machine technician looking for work.

I am familiar with:
 General machine repair
 Monitor repair
 Power supply repair
 Hopper repair
 Bill Validator repair
 Coin Comparitor repair
 Coin handling equipment repair
 Machine installation and networking
 CDS and understand CDS
 Soldering
 Circuit Testing
 Circuit Assembly and Troubleshooting

Name: Terry Studebaker

Address: PO Box 1901
City: Twain Harte
State: CA
Zip: 95383

Telephone Number: (209)586-1466

E-mail address: slottech@repairman.com

Willing to relocate? Yes

Comments: San Diego Area

OBJECTIVE: To obtain a position that is both rewarding and stable which will broaden my knowledge and challenge my capabilities.

SUMMARY: *I am familiar with electronic board, bill validator, printers, coin comparitor, CDS and understand CDS, soldering, computer assembly, circuit testing, circuit assembly and troubleshooting.
*Assertive, self-motivated, goal-oriented, organized, efficient, identified problems, diagnosed causes and determine corrective actions.

EDUCATION:  *High School Graduate: St. Anne Academy, Olongapo City, Philippines.
   *Currently attending Associated Technical College
   1445 Sixth Ave. CA. 92101

EXPERIENCE:

12/2000 to 4/2002 SYCUAN CASINO (Slot Technician)
   5469 Dehesa Rd.  El Cajon, CA.  92109
   -Electronic board circuitry.
   -Bill validator.
   -Coin compartitor.
   -Hopper jams.
   -Casino data system (CDS).
   -Troubleshooting.

3/1998 to 7/1998 COMPOSITES DYNAMICS, INC.
   44-903 Golf Center Parkway, Ste. 9, Indio, CA.
   -Grinding, rolling graphites.
   -Painting golf shafts.
   -Checking the quality of shafts before printing.

9/1997 to 3/1998 COMBI CHEM INC.
   9050 Camino Santa Fe, SD.
   -Stocking supplies.
   -Assisting chemists in the laboratory.
   -Handling the disposal of the chemicals and other wastes.

6/1996 to 9/1997 SONY ELECTRONICS INC.
   16450 West Bernado Dr.  San Diego, CA.
-Assembly line worker: picture tube assembly, electric board assembly, circuit testing, defective testing, connecting anode caps and wires, and soldering.

LANGUAGES: Bilingual-fluent in English and Tagalog (Philippine Language)

REFERENCES: Available upon request.

I am a slot machine technician looking for work
 

I am familiar with:
X    General machine repair
   Monitor repair
   Power supply repair
 X  Hopper repair
X    Bill Validater repair
   Coin Comparitor repair
X    Coin handling equipment repair
   Board level CPU repair
 X   Machine installation and networking
   Other:  I can program and fix most problems with
a game
Name  address  city  state, zip  telephone
number  fax number
E-mail address
Mark Perre
9001 Meisenheimer Ave
Las Vegas, NV 89143
(702) 656-4885
willing to relocate?    yes     X noComments: I
have over 3 years experience working on slot
machines. I have programed, installed, and built
from the frame up. I have installed ez-route
system, Paradigm into the games. I know the
ez-route system very well. I have a family and a
home in Las Vegas so I'm unable to relocate at
this time.

I am a slot machine technician looking for work

I am familiar with:
       General machine repair
       Monitor repair
       Power supply repair
       Hopper repair
       Bill Validator repair
       Coin Comparitor repair
       Coin handling equipment repair
       Board level CPU repair
       Machine installation and networking

   Name  : Raymond John Dacanay
   address  : 12 Lake View St, Villa Luisa, Sta Lucia, Sta Ana, Pampanga,
Philippines 2022
   telephone number  : 0063-45-6310438/ 0063-45-6310358
   E-mail address : dacks@lycos.com
   willing to relocate?  Yes
   Comments:
   I have been onboard ships as gaming machine technician in Europe for 2
years. Was employed for 11 years in the Philippine Amusement and Gaming
Corporation.  My last position was Slot Machine Supervisor. Am familiar with
American made machines: Bally, IGT, Universal and others: Aristocrat, Unidesa,
Sega and British made machines.
 
 
 
 

Subject:         Job
   Date:         Thu, 27 Dec 2001 13:28:04 EST
   From:         Freeley1@aol.com

Hi my name is Barb Petersen and I am currently looking for a job. I have a
degree in Electronics and Have attended many slot repair schools. I was a
casino manager for
four years. I just recently returned from Venezuela were i opened the largest
casino in that country
Thank You barb Petersen
909-927-1072
 

Subject:         Slot Tech positions
   Date:        Mon, 10 Dec 2001 00:35:35 +0000 (GMT Standard Time)
   From:         "Paul Samborski" ?TangoGB@email.com>
     To:         ?jobshop@slot-techs.com>
 

I am interested in any slot tech positions.

             I am a slot machine technician looking for work

I am familiar with:
General machine repair
Power supply repair
Hopper repair
Bill Validator repair
Coin Comparitor repair
Coin handling equipment repair
Board level CPU repair (Basic)
Machine installation and networking
Other:
telephone number  (44) 7950 831652

E-mail address

willing to relocate?   yes
Thank you for your time.

Yours SIncerely,

Paul Samborski
 

Subject:           employment
    Date:           Thu, 6 Dec 2001 20:31:55 EST
   From:           Waklut@aol.com
      To:           jobshop@slot-techs.com

To whom it may concern,

My name is Leonard Kawi, looking for a slot technician job in the Las Vegas area.  I have an Associate in
Occupational
Studies degree(Industrial Electronics Technology)  I was also a test technician for 14 months.  In addition to
those
experience and education I am also a U.S. Army Veteran with a great leadership.  I will be relocating in the Las
Vegas area
December 30, 2001.  Please let me know if my qualification will meet your requirements.

I thank you very much for your concern.

Sincerely,

Leonard Kawi
(212)529-5549
 

Subject:         Slot Tech.
   Date:         Fri, 28 Sep 2001 15:46:35 -0700
   From:         "Lisa McDaniel" ?lmcdaniel@t-three.com>
     To:         ?jobshop@slot-techs.com>

September 28, 2001

To Whom It May Concern:
I have completed the study of basic electronics, O’scope, Coin Comparitors,
JCM bill validators, hoppers, and Mikohn Progressive System at Green Valley
School of Gaming.  I also studied diagnosing and troubleshooting of machines
from manufactures such as IGT, Bally, Universal, Williams, and Sigma.  I am
very interested in becoming a Slot Technician.  I have over 25 years of
production management experience, which includes hiring, training,
counseling of employees, working with suppliers of raw materials, supply
items, and equipment.  Some of my other responsibilities include working
with State and Federal agencies in regards to training and compliance. I am
willing to relocate and or travel.
Sincerely,

Robert McDaniel
PO Box 3068
Mesquite, NV 89024
Phone (702)493-0823
E-mail: Robertmcd@hotmail.com
 

Subject:         slot management employement
   Date:         Thu, 20 Sep 2001 05:39:04 -0700 (PDT)
   From:         fatih yavuz tabanca ?fytabanca@yahoo.com>
     To:         jobshop@slot-techs.com
 

For about 10 years I am familiar with slot machines
but I don't work as a tecnician in any group. I have
worked as a slot manager,accountant,data-processing
manager, co-ordinator of slot machines in 4 casinos in
Turkey.I am looking for a job in Europe or Africa.

I'm a computer programmer and I have written programs
to the casinos.
 

Subject:         looking for work
   Date:         Tue, 18 Sep 2001 12:47:48 EDT
   From:         Ralinge@aol.com
     To:         jobshop@slot-techs.com

I have 5 years experience as a service engineer for europe`s biggest machine operator,including
a lot of casino work.i have also done a lot of video game work,and can fault find to component
level if necessary.i am working at the moment,but i would like to travel and would consider any
offers.i am based in scotland and can be contacted at binnie_scott@hotmail.com
 

Subject:         Slot Technician Job Required.
   Date:         Thu, 23 Aug 2001 18:22:26 +0100
   From:         "Lee Waite" ?LeeWaite@cwcom.net>

I am currently working as a Slot Technician in the U.K. I have 16 years experience working in
the gaming world including a contract with Celebrity Cruises.

I am currently looking to relocate to Nevada in the United States and I would appreciate it if you
would forward current vacancies by return.

Regards

Lee Waite
6 Primrose Gardens
Leeds
West Yorkshire
LS15 7QR
England

tel 00 44 7748845099
email; Lee.Waite@cw.com
 
 

Nicholas Shadnik 112-315 East First Street
North Vancouver BC, V7L 1B6
Canada Phone (604)984-9025
E-mail : shadniknik@hotmail.com

Objective To pursue a career in Electronics Technology in a Team Leader or Management position.
Employment 1997 – 2001            British Columbia Lottery Corp. (Vancouver, BC)
Senior Technician (Slot Machine Maintenance ? Operations)
1997 –1998                British Columbia Lottery Corp. (Vancouver, BC)
Computer Operations (Bingo Hall)
1995 – 1997               Micro World Computer Inc (Vancouver, BC)
Sales and Service Consultant
1987 – 1995                North Shore Taxi (NST) Inc ( Vancouver, BC)
Owner and Operator of NST

Education 2000 - British Columbia Institute of Technology (BCIT) Vancouver, BC
A+ Certificate Computer Hardware Program
1999 – 2000  BCIT                  Vancouver, BC
Diploma in Electronics Technology
1993 – 1995  Vancouver Community College (VCC) Vancouver, BC
Diploma in Software Programming
1993 – 1994 Douglas H.S.                                               North Vancouver, BC
Canadian Grade 12 - upgraded English, Math and Sciences
1997 – 1997 British Columbia Lottery Corp.                             Kamloops, BC
Complete training on slot machines fundamentals and troubleshooting
1975 – 1977  Iran Polytechnic University        Iran – Tehran
B.Sc in Electronics Techology
1963 – 1975  Ghazali High School                                           Iran – Tehran
High School Diploma

References Ed Moge
Field supervisor (BCLC)
Tel : (604) 320-9904

Pat Johnston
Human Resources Manager
Tel : (604) 270-0649
Volunteer experience 1997 – Present       British Columbia Lottery Corp. (Vancouver, BC).
Elected as a member of Advisory Committee Employees, (ACE) in BCLC.
Languages Speak English, Farsi and some Russian.
 
 

42 wickson Trail
Scarborough
Ontario
M1b 1k9

June 6, 2001

I kanthasamy Vallipuram my nick name Sam , I am writing to the position my credentials for this positions of
Slot Technician/Impress Clerk  , a position for which  I am exceptionally well qualified. I am confident that you will
quickly realize my ability to make major contributions to your organization.

I ‘m presently unemployed for one month ,I ‘m familiar with general machine repair with IGT and WILLIAMS.
Have a excellent working knowledge of PC and hardware techniques as well as software installation and
configuration. Replacement and repair such as CPU ,circuit board, interface card, Integrated chip ,LED display,
keypad etc. Am a very fast learner    Please contact at (416)281-3419 or kvallipuram@gosympatico.ca

Thank you for your consideration

Sincerely

Sam
Kanthasamy Vallipuram
 

I am a slot machine technician looking for work.  I'm presently employed
at Lac Courte Oreilles Casino in Hayward, WI.  I'm familiar with general
machine repair with IGT, ATRONIC, and WILLIAMS machines.  Have a good
working knowledge of bill validator, hopper, and coin compairitor
repairs including rebuilds on these machines.  Have a diploma for PC
Repair technition which makes me excellent at board level CPU repair, to
include "burning chips" which I've done.  Have done numerous installs to
include mounting, setup, and install of machines and our CDS system.
Have excellent working knowledge of trouble shooting CDS, to include
board, chip, LED display, keypad, ect. replacement and repair.  Am a
very fast learner, as I was able to move away from training and to my
own shift after 2 months. Personal info is as follows.

Brian Trzebiatowski
E13778 W North Reserve Lane
Stone Lake
WI, 54876
(715)865-3616
skimail@cheqnet.net

Willing to relocate for right wage
 

Subject:         Looking for employment
   Date:         Tue, 3 Apr 2001 09:46:37 -0400
   From:         "Washington, Rodger" ?RWashington@scrippsnetworks.com>
     To:         "'jobshop@slot-techs.com'" ?jobshop@slot-techs.com>

I am a slot machine technician looking for work

   I am familiar with:
       General machine repair : yes
       Monitor repair : yes
       Power supply repair : yes
       Hopper repair :yes
        Bill Validator repair :yes
       Coin Comparitor repair :yes
       Coin handling equipment repair :yes
        Board level CPU repair :yes
        Machine installation and networking
       Other: I got my start in arcade video  game repair I have been working in cable television for the past 15
years.

   Name : Rodger M. Washington
   address :10513 Rather rd.
   city : Knoxville
   state, zip : TN. 37931
   telephone number :865-691-3236, WK. 865-560-3862
   fax number : 865-531-0070
   E-mail address : Rwashington@scrippsnetworks.com

   willing to relocate?       yes
   Comments: Looking for a job in the Las Vegas area.

RODGER M. WASHINGTON
Engineer Scrippsnetworks
9721 Sherrill Blvd.
Knoxville TN. 37932
865-560-3862 ph.
865-531-0070 fx.